decakila KUCF009B 매뉴얼 - 페이지 9

{카테고리_이름} decakila KUCF009B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. decakila KUCF009B 12 페이지. Pump espresso coffee machine

Note: Do not clean with alcohol or solvent cleanser. Never

immerse the housing in water for cleaning.

Detach the metal funnel by turning it clockwise, get rid of coffee

residue inside, then you can clean it with cleanser, but at last

you must rinse with clear water.

Clean all the attachments in the water and dry thoroughly.

CLEANING MINERAL DEPOSITS

1. Fill the tank with water and descaler to the MAX level ( the scale

of water and descaler is 4:1, the detail refers to the instruction of

descaler. Please use "household descaler", you can use the citric

acid (obtainable from chemist's or drug stores) instead of the

descaler (the one hundred parts of water and three parts of citric

acid).

2. According to the program of pre-heating, put the metal funnel

(no coffee powder in it) and jug in place. Brewing water per

" PRE-HEATING".

3. After pressing the power switch one time, and then its red lamp

will be flashing, you should press the coffee switch, maker sure

the coffee/steam selector , when there is water flowing out and

close the pump, and wait for a moment, the coffee maker begins

to be heated.

4. When the lamp in power switch is illuminated, it shows the

heating is finished. Pressing the coffee switch and make two cups

coffee (about 2Oz). Then close the pump and wait for 5s.

5. Press the steam selector, the indicator in the steam switch will

be flashing, waiting for until the indicator in the steam selector

is illuminated. Make steam for 2 min by turning the steam

control knob, then turn the steam control knob to "o" position

to stop making steam. Press the Power switch for stop the unit

immediately, make the descalers deposit in the unit at least 15

minutes.

6. Restart the unit and repeat the steps of 4-6 at least 3 times.

7. Then press the coffee/steam selector , the lamp in coffee switch

will be illuminated, then press the coffee switch to brew until no

descaler is left.

8. Then brew coffee (no coffee powder) with tap water in the MAX

level, repeat the steps of 4-6 for 3 times (it is unnecessary to wait

for 15 minutes in step of 6), then brew until no water is left in the

tank.

9. Repeat the step of 9 at least 3 times to make sure the piping is clean.

10. Follow the operation as below to cancel the descaling warning

after finish descaling. Hold and press the coffee switch and steam

switch for 3 seconds at the same time under the standby mode,

and then their corresponding indicators quickly blink for 3 times,

which means the descaling warning is canceled and the working

cycle is zeroed.