Majestic Oslo 설치 매뉴얼 - 페이지 7

{카테고리_이름} Majestic Oslo에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Majestic Oslo 8 페이지. Freestanding panel

Check that the length and positioning of the support arms is

correct: insert one of the support arms into its wall socket. Drop

the 90° end into the glass boss and tighten the grub screw. Slide

the support arm in and out of its wall socket until the glass is

plumb vertical, then tighten the two socket grub screws fully. Fit

the second support arm in the same way.

Using the suction glass lifters, carefully re-insert the glass panel

into the floor profile; drop the support arms into the bosses, and

tighten the grub screws.

The Majestic Shower Company Limited

17 Flitch Industrial Estate, Chelmsford Road,

Dunmow, CM6 1XJ

Once you are satisfied that the support arms are located correctly,

loosen the glass boss grub screws and lift the support arms out. Lift

the glass panel from the floor profile using suction glass lifters, and set

to one side (leaving the support arms suspended from the wall).

Apply a bead of silicone along the inside of the floor profile, as shown.

Make sure all screws and fittings are tight. Apply a dab of silicone

to the screw covers and fit them over the boss Allen bolts.

Telephone + 44 (0) 8448 001 500

Facsimile + 44 (0) 1279 635 074

[email protected] www.majesticshowers.com