Majestic Appliances MJ-9000V 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Majestic Appliances MJ-9000V에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Majestic Appliances MJ-9000V 20 페이지. Majestic appliances owners manual front-load washer mj-9000v, mj-9000vg
Majestic Appliances MJ-9000V에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지), 소유자 매뉴얼 (18 페이지)
페이지 인쇄
- 1. Important Safety Instructions
- 2. Table of Contents
- 3. Getting Things Ready to Install
- 4. Your Appliance
- 5. Unpacking, Inspecting, Electricity, Closets/Alcoves, Plumbing, Venting
- 6. For Best Results Washing
- 7. Preparation, Sorting, Inspecting
- 8. Drying Controls, Cottons, Synthetics/Delicates, Wool
- 9. Troubleshooting Tips
- 10. Maintenance Tips
- 11. Water, Exterior, Interior, Winterizing, Detergent
- 12. Warranty Information
- 13. Service
Installing/Removing
Getting things ready to install
your appliance
Unpacking, Inspecting, Electricity, Closets/Alcoves,
Plumbing, Venting
Unpacking
•
register any damage with the freight company delivering the product.
•
machine. Re≠move the foam protecting material and the plastic bag.
•
•
been unpacked.
•
appliances being unpacked.
•
If you have any doubts, do not use the appliance and call on a qualified
technician.
REMOVING THE FOAM DRUM SUPPORT
REPLACING THE METAL BOTTOM PAN.
EXTRA CARE HAS BEEN TAKEN TO PREVENT SHIPPING
DAMAGE. MAJESTIC IS THE ONLY COMPANY WHO SHIPS THIER
APPLIANCES WITH A DRUM SUPPORT TO REDUCE TRANSIT
DAMAGE. THE FOAM DRUM SUPPORT MUST BE REMOVED. HERE
WE DEMONSTRATE HOW TO ACCOMPLISH THIS.
SHIPPING
BOLTS MUST
REMAIN IN
Carefully tip the unit
MACHINE
from front to back mak-
DURING THIS
ing sure it can't tip all the
PROCESS!
way over.
Tip the unit the other
direction from the back
and remove the leveling
legs totally
Check the packing box for external damage. It is your responsibility to
Remove the strapping, then slide the cardboard surround off the
Write down the serial number from the box or the back of the machine.
Destroy the carton, plastic bags and foam parts after appliance has
Children should never be left alone or unattended in the area where
Slide the bottom pan so
that the front slots in the
pan fit over the feet of
the leveling legs.
Page 5
Remove the foam drum
support.
Replace the rear leveling
legs and tighten them
down securely.
Majestic LLC © 01/01/2006
OWNER RESPONSIBLE
FOR DAMAGE RESULTING
FROM TIPPING MACHINE
AFTER REMOVING
SHIPPING BOLTS. AVOID
TIPPING MACHINE
FORWARD AFTER
SHIPPING BOLTS ARE
REMOVED
With the unit tipped
back, loosen the leveling
legs a few turns.
Go to the front of the
machine and retighten
the leveling legs and you
are done.