decakila KUFC002B 매뉴얼 - 페이지 6

{카테고리_이름} decakila KUFC002B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. decakila KUFC002B 10 페이지.

FUSED SAFETY PLUG

This product employs overload protection (fuse). A blown

fuse indicates an overload or short-circuit situation. If the fuse

blows, unplug the product from the outlet. Replace the fuse as

per the user servicing instructions (follow product marking for

proper fuse rating) and check the product. If the replacement

fuse blows, a short-circuit may be present and the product

should be discarded or returned to an authorized service

facility for examination and/or repair.

If your fan loses power and you suspect that the fuse on your

fan has blown, grasp plug and remove from the receptacle or

other outlet device. Do not unplug by pulling on cord.

• Slide fuse cover, located on the top of the plug, towards the

prongs of the plug. (Fig. 1)

• Carefully remove the blown fuse and snap a new fuse into

place. To reduce the risk of fire, replace fuse only with 2.5

Amp, 125 volt fuse. Fully close the fuse door by sliding back

into place. (Fig. 2)Discard the blown fuse. The plug should

now be ready for normal use.

• To reduce the risk of fire, do not replace attached plug.

Contains a safety device (fuse) that should not be removed.

Discard product if the attached plug is damaged.

• If you need further information on how or when to replace the

fuse in the safety plug, please contact Guardian Technologies

customer service.

Fig. 1

03 03

Fig. 2