Bristan Claret CLR WMBSM C 설치 지침 및 사용자 설명서 - 페이지 7

{카테고리_이름} Bristan Claret CLR WMBSM C에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan Claret CLR WMBSM C 16 페이지.

Installation

Basin Mixer (No Waste) & 1 Hole

Bath Filler

1. Grub Screw

2. Lever Handle

3. Lever Handle Spacer

4. Shroud

5. Cartridge Retaining Nut

6. Cartridge

7. Tap Body

8. Anti-Splash Assembly

9. Washer

10. 'C' Shaped Rubber Washer

11. 'C' Shaped Metal Plate

12. Fixing Rods

13. Connecting Pipes

1. Identify all components are present

prior to starting installation.

2. Ensure that the washer (9) is fitted

to the underside of the tap body

(7) before fitting to the basin/bath.

Secure the 'C' shaped rubber washer

(10) and metal plate (11) into position

on the underside of the basin/bath,

using the threaded rods and nuts

(12).

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

3. Fit the inlet connection pipes (13) by

hand only (DO NOT OVERTIGHTEN)

to the fitting and connect the hot

and cold supplies.

4. Connect the hot and cold water

supplies to the connecting pipes.

5. Turn on the water and fully open

the mixer, allowing it to run for a

few minutes and check all joints and

connections for any leaks.