Bristan FLT TBAS C 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} Bristan FLT TBAS C에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan FLT TBAS C 16 페이지. Flute tap range

Installation

1. Screw the flexi tails into the bottom

of the tap body by hand only

(DO NOT OVERTIGHTEN).

2. Feed the flexi tails through the hole,

ensuring the washer is fitted between the

body and the basin/ bath.

3. Screw the fixing rod into the bottom of

the tap. Slide 'C' shaped rubber washer

and 'C' shaped metal washer onto the

fixing rod up to the underside of the basin/

bath.

4. To secure the tap in place tighten the

fixing nut onto the fixing rod until is fully

tightened against the 'C' shaped metal

washer. Suitable spanner can be used to

fully tighten the fixing nut.

5. Connect the flexi tails to the hot and

cold water supplies.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.