Majestic fireplaces GAHR4S0 설치 지침
{카테고리_이름} Majestic fireplaces GAHR4S0에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Majestic fireplaces GAHR4S0 2 페이지. Arch screen door kit
페이지 인쇄
The GABS4S0, GASS4S0 and GAHR4S0 are designed
for use on Model DVA4136 and DVB4136 fireplaces.
The GAHJ4S0 is designed for use on Model RDV4136
fireplace.
WARNING: Do not remove existing
glass frame! Fireplace will not function
properly without glass frame. (Operating
without glass frame in place could cause
carbon monoxide (CO) to spill into the
room.)
CAUTION: Allow unit to cool completely if it has
been in operation.
Kit Contents:
•
Screen Door Assembly, left
•
Screen Door Assembly, right
•
Arch Frame
•
Installation Instructions
Installation Instructions
NOTE: Remove all plastic from packaging.
1. Remove existing top louvre from fireplace by lifting
up and pulling out (Refer to top louvre instruction
manual for details).
2. Hang arch frame over top of the existing glass
frame.
3. Mount folding door assembly onto arch frame by
hanging doors over top of the hinged pins located
on both sides of the arch frame. (Fig. 1)
Ensure the left door is installed on the left and
right door is installed on the right.
4. Re-install top louvre assembly.
Arch Screen Door Kit
Installation Instructions
Models:
GABS4S0 (Black), GASS4S0 (Pewter)
GAHR4S0 (Black), GAHJ4S0 (Black)
Figure 1
KT351
arch screen door
11/02
Screen Door
Assembly
Hinged Pins
KT351
20013452 3/08 Rev. 1