Bristan MT503CP-ISOELB 설치 지침 및 사용자 설명서 - 페이지 2

{카테고리_이름} Bristan MT503CP-ISOELB에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan MT503CP-ISOELB 12 페이지. Temperature stabilised thermostatic mixing valve

페이지 인쇄

Contents

Welcome to your new Bristan Mixing Valve

All products manufactured and supplied by Bristan are safe provided they are installed,

used correctly and receive regular maintenance in accordance with these instructions.

Isolation valves must be fitted to the inlet water supplies to ensure ease of future

maintenance. This product must not be modified in any way as this will invalidate the

guarantee.

Full access must be made available for future maintenance / servicing purposes.

This product needs to be installed in accordance with, and meet the requirements of

the Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.

These mixing valves have also been tested to the TMV2 and TMV3 schemes and

comply to BS EN: 1287 and BS EN: 1111; so long as they are commissioned and serviced

in line with TMV standards. Please read the TMV guide supplied with this valve for

further information.

If in doubt, contact a registered plumber or your Local Water Authority or the

Secretary of the Institute of Plumbing, address as follows;-

The Institute of Plumbing,

64 Station Lane,

Hornchurch,

Essex,

RM12 6NB, Tel: 01708 472791

Contents

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

3-4

5-8

9-10