Bristan CAP BF C 설치 지침 및 사용자 설명서 - 페이지 6

{카테고리_이름} Bristan CAP BF C에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan CAP BF C 12 페이지.

5. Installation

Basin Taps & Bath Taps

1. Identify all components are present prior to installation.

2. Install the taps (5) to the basin/bath. The backnut (1)

and backnut washer (2) are used under the basin/bath to

secure the taps to the surfaces of basin/bath with the

washer (3) and the plinth (4) above.

3. Connect the hot and cold water supplies.

4. Turn on the water supplies. Open both taps, letting the water

flow for a few minutes to check all joints and connections for

leaks.

Note:

Note: Bath taps operate at a minimum pressure of 0.3 bar

Note:

(3 metre head).

Basin Mixer- - - - without waste

Basin Mixer

without waste

1. Identify all components are present prior to installation.

2. Install the mixer (7) to the basin. Secure the mixer to the surface of basin using the fixing

kit (10) with plinth washer (9) and plinth (8) above the basin.

3. Screw in flexible connecting pipes (11) to the mixer by HAND ONLY (DO NOT

OVERTIGHTEN), and then connect hot and cold water supplies.

4. Turn on both water supplies. Lift and turn the handle both ways for a few minutes, letting

the water flow, to check all joints and connections for leaks.