Bristan CAP BID C 설치 지침 및 사용자 설명서 - 페이지 3

{카테고리_이름} Bristan CAP BID C에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan CAP BID C 12 페이지.

페이지 인쇄

1. Important Safety Information

Please read these instructions thoroughly and retain for future use. All products manufactured

and supplied by Bristan are safe provided they are installed correctly, used correctly and receive

regular maintenance in accordance with these instructions. If you are in any doubt about your

ability to install these products safely you must employ the services of an experienced plumber.

Before starting any installation please consider the following: Prior to drilling into walls,

check that there are no hidden electrical wires, cables or water supply pipes. This can be

checked with the aid of an electronic detector.

• If power tools are used do not forget to:

Bath Shower Mixer only – Do not use if the showerhead or shower hose has been damaged or

Bath Shower Mixer only

is blocked. Do not crush or kink the shower hose, This could damage the hose and cause leaks.

These products must not

must not be modified in any way as this will invalidate the guarantee.

must not

These fittings need to be installed in accordance with and meet the requirements of the Water

Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.

2. Specification

Operating pressure range (bar)

Basin Taps

Bath Taps

Basin Mixer

Bidet Mixer

Bath Filler

Bath Shower Mixer

Maximum static pressure – 10.0 bar

NOTE:- Nominally equal (balanced) inlet supply pressures are recommended for optimum

performance.

Designed to comply with BS EN 200 for single taps/ combination taps for water systems of type 1

and 2 general technical specifications and to be used within systems designed to BS 6700.

BS 6700 recommends the temperature of stored water should never exceed 65°C. A stored water

temperature of 60°C is considered sufficient to meet all nominal requirements and will minimise

the build up of lime scale in hard water areas.

- Wear eye protection

- Unplug equipment after use

Min

Max.

0.2

8.0

0.3

8.0

0.2

8.0

0.2

8.0

0.2

8.0

0.3

8.0