Bristan CAP BID C 설치 지침 및 사용자 설명서 - 페이지 9

{카테고리_이름} Bristan CAP BID C에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan CAP BID C 12 페이지.

5. Installation cont

Bath Filler & Bath Shower Mixer

1. Identify all components are present prior to installation.

2. Install the mixer body (5) to the bath using the backnuts (1) and backnut washers (2)

provided under the bath with the plinth (4) and washer (3) above.

3. FOR BATH SHOWER MIXER ONLY: Fit the hose to the mixer (5) underneath the spout to

diverter (11). Fix the wall bracket to the wall ensuring that the handset and hose will reach

it.

4. Connect the hot and cold water supplies and turn water supplies on.

5. Fully open the valves (6) by turning handles (10), letting it run for a few minutes to check for

leaks.

6. FOR BATH SHOWER MIXER ONLY: Operate the mixer in both bath and shower mode. To

switch from bath to shower mode, pull the diverter knob (11) up. After use, the mixer

automatically reverts to the bath filling mode.

Note: The Bath Shower Mixer operates at a minimum of 0.3bar (3 metre head).

Note:

. . . .