Bristan DOCM-T3 W 설치 개요 - 페이지 11
{카테고리_이름} Bristan DOCM-T3 W에 대한 설치 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan DOCM-T3 W 16 페이지.
페이지 인쇄Installation - Solo T3 Tap
1
Screw the fixing rods into the bottom of
the fixing base.
3
Slide the metal plate onto the threaded
rods under the basin and secure the fixing
base to the basin by tightening the fixing
nuts onto the fixing rods. Ensure the
fixing nuts are tightened fully by using a
suitable spanner.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
2
Position the fixing base into the hole in the
basin ensuring the rubber washer is fitted
between the fixing base and the basin.
4
Screw the copper connecting pipes into the
bottom of the fixing base by hand only (DO
NOT OVERTIGHTEN).
Connect the copper connecting pipes to
the water supplies. Do not turn the water
supplies on.
11