Bristan IRSD1-BZ 설치 지침 및 사용자 설명서 - 페이지 6
{카테고리_이름} Bristan IRSD1-BZ에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan IRSD1-BZ 16 페이지. Infrared automatic soap dispensor
Bristan IRSD1-BZ에 대해서도 마찬가지입니다: 설치 지침 및 사용자 설명서 (16 페이지)
페이지 인쇄
Installation
1. Fit The Spout
Fit the spout to the sink / basin ensuring
the dispensing cable and sensor cable
are threaded through the hole in the sink
/ basin.
2. Secure Spout to Sink / Basin
Screw the metal backnut onto the thread
of the spout upto the underside of the sink
/ basin.
Tighten backnut using a suitable spanner.
2. Fit Wall Brackets
Position the brackets onto the wall
surface and mark the position of the fixing
holes.
Remove the brackets and drill suitable
holes for the wall plugs supplied.
Before drilling into walls, check
that there are no hidden electrical wires,
cables or water supply pipes. This can
be checked with the aid of an electrical
detector:
If power tools are used do not forget to:
- Wear eye protection
- Unplug equipment after use
Fit the wall plugs and position the
brackets into position and secure using
the screws provided.
6
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Battery
Wall
Bracket
Dispenser &
Sensor cables
Bottle Wall
Bracket