Decent Devil AH-64 사용 설명서 - 페이지 3

{카테고리_이름} Decent Devil AH-64에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Decent Devil AH-64 11 페이지.

Decent Devil AH‐64 Apache – 500 size – Instruction Manual

13 - Cabin Hatch Mounts

14 - Main Gear Distancers

15 - Main Gear Mounts

16 - Tail Landing Gear

17 - Main Frame

1. Installation of the elevated tail conversion parts on your existing mechanics

Before you can install your helicopter mechanics into the scale body, you must convert your TREX 500 into

an elevated tail one, adjust it properly and test fly it. Here is how its done:

A) Remove tail boom

First of all, disassemble the tail boom entirely, so that only your belt is coming out the tail boom holder.

B) Exchange mainframe

The mainframe parts supplied with the AH-64 Kit do allow your tail boom to exit the mainframe at a much

lower position than in the original version. Dismount both original mainframes. Assemble all parts to one

side of the conversion main frame, but do not assemble the other side yet.

C) Exchange belt pulley

Take your original belt pulley, and push the belt pulley off the shaft. The gear can stay on the old shaft. Then,

press the pulley onto the supplied shaft, centered on the rimmed area. Install the supplied gear as shown on

the shaft, mount it together with the supplied prolonged tail belt into its position. Then mount the other side

of the mainframe again.

18 - Tail Frame

19 - Tail tube & holder

20 - Tail belt

21 - Pushrod holder

22 - Belt pulley

AH-64 Apache Fuselage assembly instruction:

23 - Pulley spacers

24 - Screw set

25 - Belt shaft & gear

26 - Pushrod & tube

27 - Cabin Windows (no pic)