Green VOR-IC7000-G 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Green VOR-IC7000-G에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Green VOR-IC7000-G 15 페이지. Full commercial indoor cycle

Step 4-5: Handlebar & Stem

1. Insert Stem (#20) into main frame of the bike.

2. Use lock lever (#18) to tighten.

3. Insert (1) Stem/Post Slider locking tab onto the top of the Stem (#20).

4. Attach (1) (#74) Handlebar (front) End Cap and (1) (#75) Handlebar (rear) End Cap

to Handlebar Frame (#11). Ensure that the endcaps are fully seated into the handlebar

frame.

5. Attach Handlebar (#11) onto Handlebar Slider (#13) using (4) bolts (#5) and (1) Handlebar

and Slider fix Plate (#4).

6. Attach the Lock Lever (#12) onto the Handlebar Slider (#13). Slide the Handlebar

assembly until you reach the desired position.

7. Use Lock Lever (#12) to tighten and secure the selected position.

8. Place the Handlebar-stem assembly into the front tube and adjust to your ideal position.

9. Using Lock Lever (#18), tighten and secure to desired position.

NOTE: Do not rise above the safety line.

Step 6-7: Saddle & Seat Post

1. Insert seat post (#15) into frame's seat tube, assembly saddle (#17) on saddle top slider

(#16).

2. Adjust slider using lock lever (#12) for forwards or backwards, and then tighten until reach

the proper position. Using lock lever (#18) adjusts seat post (#15) and tighten to secure

proper position.

www.GreenSeriesFitness.com

STEP 5

©June 2015

VOR-IC7000-G

Revision 1.1

NOTE: Do not rise

above the safety line.

Call Toll free at (800) 269-7410