Gamma 5002 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Gamma 5002에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 5002 18 페이지.
페이지 인쇄
ASSEMBLY INSTRUCTIONS
Installing the Turntable
The turntable is located on top of the foam
packing in the the shipping carton.
Insert the center post of the turntable into the
bushing located in the top of the tensioner
bar post.
Installing the Frame Support Posts
The GAMMA 5002 support post assemblies
are precision aligned at the factory and are
marked for proper installation on the turn-
table.
Install the support post with the dot on its
base to an identical dot on the turntable.
Align the threaded hole in the bottom of the
frame support post with the slot in the turn-
table. Screw the lever lock bolt with washer
into the bottom of the support post and
tighten gently.Position the washer with the
rounded edge toward the turntable. Repeat
procedure on the opposite side of the turntable.
Fixed Clamp Installation
To install the clamps, remove the winged
lock knob to separate the knob from the
lower guide bushing. Be careful not to lose
the thrust bearing components located in the
center recess of the knob.
Align the clamp base with the clamp slot of
the turntable base. Insert the lower guide
bushing into the clamp from the bottom of
the turntable making sure to engage the
guide with the clamp slot.
5