Gamma 6002 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Gamma 6002에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6002 20 페이지.

ASSEMBLY INSTRUCTIONS

Bellows Installation

The bellows assembly is supplied in two

pieces and should be assembled as follows.

Place the bellows section with the flange over

the upper support column with the flange on

the top. Place the remaining bellows over the

upper support column and mate it with the

flange on the lower bellows.

Tool Tray Installation

Lower the tool tray over the top of the upper

column support and let it rest loosely on the

bellows assembly.

Tension Track Installation

Place the tube of the tension track assembly

over the top of the upper column support.

Align the tension track with the long leg of the

base assembly. Securely tighten the two

socket set screws on the tension track as-

sembly tube, locking it to the upper column

support. Align the notch in the tool tray with

the tension track bar while raising the tool

tray. Secure the tray with the set screws in the

side of the tray casting.