Gamma 6004 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Gamma 6004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6004 20 페이지. 6 point mounting
Gamma 6004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지)

페이지 인쇄

ASSEMBLY INSTRUCTIONS

Base Leg Assembly

The stringing machine uses a four leg base

design. The legs must be assembled to the

lower column support before use. This is the

larger of the two posts with the GAMMA label.

Note: For illustration purposes, the support

column has been painted white for these

instructions.

Align the holes in the leg flange with the

matching holes in the lower column support

post. Secure the leg with one FLAT HEAD

cap screw through the upper hole, and one

SOCKET HEAD cap screw through the bot-

tom hole. Repeat this procedure for the three

remaining legs.

Base Foot Height Adjustment

Each foot of the Base Stand can be adjusted

to compensate for uneven surfaces.

Upper Column Support Assembly

The upper column support is shipped inside

of the lower column support. Unloosen the

two set screws at the top of the lower column

support / base leg assembly. Extend the up-

per column to the maximum height and lock

in place with the two set screws located at

the top of the lower column support.