Gamma 6004 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Gamma 6004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6004 20 페이지. 6 point mounting
Gamma 6004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지)

페이지 인쇄

ASSEMBLY INSTRUCTIONS

Turntable and Mounting System

Installation

To install the turntable position the turntable

over the turntable pin and align the bolts,

located in the poly bag, with the holes in

the ﬂ ange. Secure them with the included

hex wrench.

String Clamp Installation

The post of the string clamp and tube of the

string clamp base are treated with grease to

provide protection against corrosion during

shipping. Remove any excessive grease with

a clean cloth prior to use. The post and tube

may also be cleaned with isopropyl alcohol.

After this type of thorough cleaning, the post

and tube should be treated with a light coating

of machine oil to protect the surfaces against

corrosion and to ensure smooth operation.

Tensioner Installation

Remove the button head screw and washer

located at the end of the tensioner bar with the

3mm hex wrench provided. Slide the tensioner

onto the bar, being careful to align the bar with

all of the bearings and the drive gear with the

gear track. Replace the button head screw

and washer in the end of the tensioner bar.