Gamma PROGRESSION 602 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Gamma PROGRESSION 602에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma PROGRESSION 602 16 페이지.
Gamma PROGRESSION 602에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)

페이지 인쇄

STRINGING THE FRAME

Setting Tension

To set the stringing tension, loosen the

locking knob on the side of the drop weight.

Slide the weight in the appropriate direction

until the face closest to the string gripper

is indexed with the desired tension mark on

the tension bar.

The drop weight is of a two piece design.

When assembled, it will accommodate ten-

sions from 20 to 90 lbs. For tensions from

8 to 20 lbs., remove the 5mm bolt on the

face of the drop weight, and use the smaller

portion of the weight as described above.

Note: Tensions above 77lbs. require removal

of the drop weight bar end cap.

Clamping the First Main String

To begin stringing the main strings, thread

the two ends of the string through the two

center holes at the appropriate end of the

frame and continue through the opposite

center holes. Thread one end of the string

through the adjacent grommet hole and pull

excess by hand.

Secure one of the strings using a string clamp.