ADF LINEA 100 조립 지침 매뉴얼 - 페이지 11
{카테고리_이름} ADF LINEA 100에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADF LINEA 100 16 페이지. Nmv inbuilt heater zero clearance box supplement instructions
ADF 1000 NMV LINEA ZERO CLEARANCE BOX ASSEMBLY INSTRUCTIONS
1/1/21
Step 3.
Screw the base panel of the Zero Clearance box to the stand base, using the
self tapping machine thread screws. Then take the ZCB side panel, and put one
of the screws through the side and the base panel. The side panel should be
inside the base panel fold. Then slide the back panel into the inside of the base
panel rear fold, and on the outside of the side panel. Add screws but don't
fully tighten until the top panel is on.
Repeat for the other side
panel.
NOTE: When screwing 2 panels together through the existing holes , the screw
should go though the larger hole first, then through the smaller hole, and
cutting the thread in the smaller hole. Ie some holes may screw from the
inside, some from the outside.
11