Gamma Progression Els 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Gamma Progression Els에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Progression Els 19 페이지.
Gamma Progression Els에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지)

페이지 인쇄

1. Maintenance & Adjustments

increased friction between the clamps and the string to allow for reduced clamping pressure

while securing and holding the string under tension.

STRINGING THE FRAME

String Clamp Operation

The string c

lamps are a dual action design

where the string clamp and clamp base

operate independently of one another.

To clamp a string, lift the clamp head and

place the string between the jaws and de-

press the string clamp lever to secure the

string. The clamping pressure applied to the

string should be adjusted to provide suffi-

cient pressure to secure the string when

subjected to the desired pulling tension. The

diamond coated gripper plates provide for

Clamp Base Operation

To lock the string clamp base to the turn-

table, rotate the clamp base locking lever

clockwise. To release the string clamp base

from the turntable, rotate the clamp base

locking lever counter-clockwise.

The Locking Lever should be tightened

enough to prevent clamp base slippage on

the turntable, when the desired tension is

placed on the string. To go from the loose

position to the clamped position and back,

generally requires the rotation permitted by

the slot in the clamp base.

Getting Started

To begin stringing the main strings, thread

the two ends of the string through the two

center holes at the appropriate end of the

frame and continue through the opposite

center holes. Thread one end of the string

through the adjacent grommet hole and pull

excess by hand.

Secure one of the strings using a string

clamp.