Gamma Progression STII 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Gamma Progression STII에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Progression STII 19 페이지.

MAINTENANCE & ADJUSTMENTS

Adjusting the Tensioner Brake

After stringing many racquets, the brake of

the tensioner may need to be adjusted.

With the brake lever engaged, loosen the

lock bolt located on the back side of the

tensioner frame with the 4mm hex wrench.

Note: The lock bolt should only be loosened

enough to be turned by hand and must not

be removed completely.

A - Lock Bolt

Adjusting the Tensioner Brake

With the lock bolt loosened and the brake

lever engaged in the latch, insert the 6 mm

hex wrench through the hole in the tensioner

cover and into the (B) brake lever adjusting

bolt.

B - Brake Lever Adjustment Bolt

Adjusting the Tensioner Brake

To tighten the braking mechanism, turn the

brake lever adjusting bolt counter clockwise

about 1/8 turn. Retighten the lock bolt on the

back side of the tensioner frame and check

for brake tightness. The tensioner should

move freely along the track with the brake

lever engaged and should hold tension with

the brake lever released. If more adjustment

is needed, repeat steps above until properly

adjusted.

Note: Cover removed for clarity