Gamma X-2 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Gamma X-2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma X-2 16 페이지.
Gamma X-2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (11 페이지)

MAINTENANCE & ADJUSTMENTS

from dirt, oil, and any string coating for them to grip properly. Keep the clamp jaws clean with

isopropyl alcohol.

Adjustment

Knob

Turntable Bushing Adjustment

The turntable bushing is adjusted at the fac-

tory for optimum performance. After time and

use, the turntable bushings may need minor

adjustment. An adjustment is indicated when

noticeable turntable looseness or wobble

occurs while stringing.

To adjust the ﬁ t between the turntable pin

and the bushings, tighten the set screw at the

top of the bushing using a 3mm hex wrench.

Tighten until the turntable rotates smoothly

without excessive free play.

Clamp Adjustment

The ﬂ oating clamps provided with your ma-

chine will need minor adjustments according

to what string type, construction, and gauge

you are using.

If the strings slip through the jaws of the

clamp, tighten the clamp by turning the

thumb knob opposite of the handle, in the

clockwise direction. If the clamps leave

impressions or damages the string, they are

too tight and the thumb wheel must be turned

counterclockwise.

The clamp jaws must be clean and free