Airflow ACES48SS 설치 지침

{카테고리_이름} Airflow ACES48SS에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Airflow ACES48SS 4 페이지. Ceiling sweep fan

페이지 인쇄

Ceiling Sweep Fan

ACES48ALR, ACES48R,SS

Included with your Fan

A. Motor Assembly

B. Three Blades

C. I.R. Remote Controller

Hangsure Bracket

IMPORTANT NOTES

1. To ensure proper balance, the blades are a matched set. Do

not mix-up the blades with those from another fan

2. Transport and transit handling may loosen factory ﬁ tted

cables. Please check and secure terminal screws before

installation.

Protecting the Fan

Do not place the motor directly onto a ﬂ at surface.

Plastic Nipple

The plastic nipple underneath the motor cannot support the

weight of the motor and may be easily damaged. When working

on the fan, place the motor on the foam packaging with the

nipple located in one of the recesses. This protects the nipple

and the ﬁ nish.

Thank you for purchasing this Airﬂ ow Ceiling Sweep Fan. You can be assured of years

of trouble free operation by installing your ceiling fan carefully in accordance to these instructions.

Please read all the instructions before commencing, then complete each step in order.

D. Screw Pack

E. Mounting Bracket

F. Instruction Sheet.

Foam

Packaging

Installation Instructions

REGISTERED DESIGN • REGISTERED PATENT

All electrical work must be carried

out by a qualiﬁ ed electrician.

Clearances and Angled Ceilings

Minimum

300mm from

other obstacles.

Blades:

Minimum 2.1m

above ﬂ oor.

Controlling a Single Fan

This fan has been supplied with a quality remote controller that is

designed to operate a single fan and includes on/off control and

dimming for light ﬁ ttings.

1.0 Mounting the Fan Support Bracket

Select a suitable location to mount the fan support bracket.

The mounting bracket must be ﬁ xed to a solid structural member

such as a ceiling joist or a securely ﬁ xed noggin and be capable

of supporting 15kg.

Additionally it must be located so as to provide the blade with a

minimum clearance from the ﬂ oor of 2100mm, and from other

obstructions of at least 300mm.

Hangsure Mounting

Secure ﬁ xing to support 15kg

18.5

Hangsure Mounting

Suitable for pitched ceilings

with a maximum angle of 18.5 o .