Gamma Cove LED 200 사용자 설명서 - 페이지 8

{카테고리_이름} Gamma Cove LED 200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Cove LED 200 12 페이지. Cool white & warm white led par/wash

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, it is recommended to use a DMX terminator. This helps in preventing

corruption of the digital control signal by electrical noise and reflections. The DMX

terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,

which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below:

COVE LED 200 CW/WW – GAMMA LED Vision

Page 8 of 12