Gamma Leko Toro 사용자 설명서 - 페이지 11

{카테고리_이름} Gamma Leko Toro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Leko Toro 13 페이지. Rgbw 200w led spot

3. Maintenance

Fan Cleaning

Periodically do a visual inspection of the fans. If they are dirty, power off the unit and use

a small electronics vacuum to clean the fans out. Do not use a can of C02 or an Air Com-

pressor. These will simply blow the dust into the unit and may leave other residue.

Front Lens and Shutter Blade Cleaning

The front lens should be cleaned so that light output is maintained. The shutter blades

may also occasionally need cleaning.

With the light powered off, use a moist, lint-free cloth. Never use alcohol of solvents to

clean the fixture.

Never spray any cleaners on the fixture.

The following are a few common problems that may occur during operation. Here are

some suggestions for easy troubleshooting:

A. The unit does not work:

Check that the unit is plugged in to a working power connector.

•

Press the menu button to confirm that the unit is powered on. If the screen does

•

not light up, the unit has no power.

B. Not Responding to the DMX Controller

Check DMX cables to verify that they are plugged in and functional.

•

Check the DMX address and mode – does it match the address and mode patched

•

in the lighting console or software?

Plug the light directly into the DMX controller with a cable that you know is good.

•

Unplug all other lights – does it work?

Try to use another DMX controller.

•

Leko Toro– GAMMA LED Vision

Page 11 of 13