Gamma SPKLEKO600 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Gamma SPKLEKO600에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma SPKLEKO600 9 페이지.

1. Product Introduction

2 kinds of running model

External control mode (Slave model)

DMX 512 controller control(2 kinds channel modes)

Master/salve model control (auto match the signal from controller and the Master light, no

need to set by menu)

static mode (Master model)

It can fix any color without the controller ,also work this color with strobe

Non-linear dimmer and linear dimmer

The speed of dimmer can be set under the controller control

Screen Protect

It will enter blank screen without any operate on the keyboard in 30 seconds . Press any keys then

it can quit screen protection.

Temperature Protection

It can be set to temperature protection mode

Speed of the Fan

The fan will start to work when the working temperature reach 40 degree, and the speed will be

changed according to the change of temperature.

Can be Reverse display

When using controller to control multi lights to work in strobe, the controller just send the channel data .

The strobe effect will be depend on each light itself . And please take attention for the follow situation:

1. There will be many situations make the lights are not synchronization in the beginning. (For

example: the different time of opening the light , or different time of them connect to the controller) .In this

case, you can change value of the controller( for example push 20 to 0, and back to 20), then it can be

synchronization.

2. Due to crystal frequency of different lights are not the same exactly, so it may

synchronization after long time.

3. If need to keep synchronization for long time, there are two ways to do so:

A. Using the controller to edit program make the strobe, auto run effect,then they must be

synchronization.

B. Using the Maser/Slave model

not be