Gamma SPKLEKO600 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Gamma SPKLEKO600에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma SPKLEKO600 9 페이지.

SAFETY WARNING

1. Warning

﹡ Every person involved with the installation , operation and maintenance of this device has to be qualified .

﹡ User must follow the instructions of this manual

﹡ Unqualified person can not open the housing cover and operate the device , or the dealer will not accept liability for any

resulting defects or problems.

﹡ The device against rain and moisture

2. Waring notes :

﹡ Power supply : AC 100V-240V , 50/60Hz

﹡ Make sure the power switch is off , the power plug , outlet and the earth connection is in well condition before connecting

the device with the mains.

﹡ Please use qualified power plug and the outlet. Never connect the power cord of this device with other electrical

equipment.

﹡ During move and installation , make sure the device not crashed with metal parts and other tough materials.

﹡ Always disconnect from the mains, when the device is on the installation and dismantled

﹡ The minimum distance between light-output and the illuminated surface must be more than 50cm

﹡ The device must only be installed on a non-flammable surface . In order to safeguard sufficient ventilation , leave 50cm of

free space around the device . Please note that heat-sensitive objects may be deformed or damaged by the emitted heat .

﹡ During the operation the housing becomes very hot ! Do not operate the device for 15 minutes after switching off .

﹡ The maximum ambient temperature Ta = 45℃ must never be exceeded , The maximum housing temperature Tb = 80℃

must never be exceeded .

﹡ For indoor use

﹡ Replace any visible cracked protective shield , filters and lens .

﹡ The protective shiel, filters and lens will require weekl cleaning as smoke Cfluid tends to building up residues , reducing

the light Coutput ver quickl .

DISCLAIMER

1. The device is with one year warranty . The warranty period appear non-artificial quality problem, this company is

responsible for free maintenance

2. User violate operation caused the machine failure, this is user responsibility.

3. If due to the wrong operation or intense impact caused product destroy even safety accidents, the manufacturer does not

undertake any responsibility

4. Prohibit replaced product components by any person, therefore caused any consequences will be whose responsible

Please contact us freely when you need our related products or information...