Decimator 12G-CROSS 운영 매뉴얼 - 페이지 11
{카테고리_이름} Decimator 12G-CROSS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Decimator 12G-CROSS 13 페이지. Hdmi / sdi 4k cross converter with scaling and frame rate conversion
5. Colour / HDMI VESA IN (Parameter)
This option controls how the AVI (Auxiliary Video Information) InfoFrame is handled when a VESA format is
detected on the HDMI input. If AVI InfoFrame is detected, the default option will be used. If the setting is set
to always, then no matter what is detected in the AVI InfoFrame, that colour space will be used.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) 709 (Default)
2.) 2020 (Default)
3.) 601 (Always)
4.) 709 (Always)
5.) 2020 (Always)
6.) 601 (Default)
6. Colour / SDI 3G OUT (Parameter)
This option controls the colour space on the SDI output, when the output format is set to 3G.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) 709
2.) 2020
7. Colour / SDI 6G/12G OUT (Parameter)
This option controls the colour space on the SDI output, when the output format is set to 6G/12G.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) 2020
2.) 709
8. Colour / HDMI 3G OUT (Parameter)
This option controls the colour space on the HDMI output, when the output format is set to 3G.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) 709
2.) 2020
9. Colour / HDMI 6G/12G OUT (Parameter)
This option controls the colour space on the HDMI output, when the output format is set to 6G/12G.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) 2020
2.) 709
10. Colour / HDMI RGB OUT (Parameter)
This option controls the HDMI output colour space legal limit, when outputting RGB.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Full
2.) Limited
11. Colour / HDMI Y,Cb,Cr OUT (Parameter)
This option controls the HDMI output colour space legal limit, when outputting Y, Cb, Cr.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Limited
2.) Full
12G-CROSS OPERATING MANUAL VERSION 1.0
Copyright © 2020 Decimator Design Pty Ltd, Sydney, Australia
E&OE
10