Decimator MD-HX 운영 매뉴얼 - 페이지 9

{카테고리_이름} Decimator MD-HX에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Decimator MD-HX 11 페이지. Hdmi / (3g/hd/sd)-sdi cross converter with scaling and frame rate conversion
Decimator MD-HX에 대해서도 마찬가지입니다: 운영 매뉴얼 (11 페이지)

페이지 인쇄

Setup: (Has SUB‐MENUs)

Setup

Load Defaults

When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.

Press the < and > buttons to move left or right respectively through the 4 menus below and press the BACK

button to go back to the Main Menu when finished.

The current value for each Sub Menu is shown in the Parameter Window.

1. SETUP / LOAD DEFAULTS (Action)

When highlighted in the Menu Window, press the ENTER button to load the default settings. The device will

be reset to the Main Menu Input Status.

2. SETUP / LCD OFF TIME (Parameter)

This is time taken for the LCD light to turn off after the last button press.

When the sub menu is highlighted, press ENTER to toggle through the following times:

1.) 5 seconds

2.) 15 seconds

3.) 30 seconds

4.) 1 minute

5.) 5 minutes

6.) 10 minutes

7.) 30 minutes

8.) Never

3. SETUP / BACK2STATUS TIME (Parameter)

This is time before the main menu is returned to Input Status after the last button press.

When the sub menu is highlighted, press ENTER to toggle through the following times:

1.) 5 seconds

2.) 15 seconds

3.) 30 seconds

4.) 1 minute

5.) 5 minutes

6.) 10 minutes

7.) 30 minutes

8.) Never

4. SETUP / AUTO SAVE (Parameter)

This parameter will determine if any changes will be saved to memory when changes are made.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) Yes

2.) No

MD‐HX OPERATING MANUAL VERSION 1.3

E&OE

Main Menu <==

Sub Menu

Parameter Window