Gamma First Set Junior Net 18’ 매뉴얼

{카테고리_이름} Gamma First Set Junior Net 18’에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma First Set Junior Net 18’ 2 페이지.

PACKAGE CONTENTS

1 - Leg Base Assembly

5 - Base Spreader Tubes

1 - Center Spreader Tube

2 - Net Posts

1 - 18' x 33" Net

Center Spreader Tube

ASSEMBLING THE JUNIOR NET FRAME

Step 1: Position the Leg Base Assemblies on the ground approximately 18' apart as shown above.

Step 2: Insert the tapered (male) end of 1 Base Spreader Tube (male / female) into a Leg Base Assembly. Insert 2 more Base Spreader

Tubes, each into the previous Base Spreader Tube as shown above.

Step 3: Insert a Center Spreader Tube (male / male).

Step 3: Insert the male end of the Center Spreader Tube into the female end of 1 Base Spreader Tube. Next, insert 1 Base Spreader

Tube.

Step 4: Insert the male end of the final Base Spreader Tube from Step 3 into the Leg Base Assembly as shown above.

Step 5: Insert the Net Post into the top of each Leg Base Assembly.

Made in Taiwan

(male / male)

Base Spreader Tube

(male / female)

First Set

Junior Net 18'

Net Post

Leg Base Assembly

Updated 03.22.12