IKEA RODULF 매뉴얼 - 페이지 9

{카테고리_이름} IKEA RODULF에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA RODULF 25 페이지. An electro-mechanically height adjustable work-surface with control interface to adjust height up and down.
IKEA RODULF에 대해서도 마찬가지입니다: 매뉴얼 (25 페이지), 매뉴얼 (32 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

Trouble shooting guide

NOTE!

Do always disconnect the cable from the wall socket before maintenance!

Symptom

The desk does not move.

Only one column is

moving.

The columns are moving

at different speeds.

The desk only moves

short distances.

The desk stops and

reverse during operation.

The desk is not able to

drive all the way up or all

the way down.

The desk can only drive

in one direction (up or

down).

The desk is not

horizontal.

Check

Make sure that all cable

are connected.

Unplug the desk from the

wall socket for roughly 1

minute and reconnect.

It is possible to move the

slower column by pulling/

pushing.

It is not possible to move

the slower column by

pulling/pushing.

Make sure that the desk

is not overloaded.

Make sure that nothing

is blocking the desk

movement.

Try

Connect the cables.

Follow installation

instructions and perform

a reset.

Perform a reset. If

there's still only one

column moving, replace

the column that is not

moving.

Replace the column that

is moving slower.

Replace the column that

is moving faster.

Unload the desk. If the

problem remains, replace

the control box.

Remove the obstacle.

If the problem remains

replace the whole

underframe.

Check all connections.

Perform a reset.