IKEA RODULF-GF-470 매뉴얼 - 페이지 9

{카테고리_이름} IKEA RODULF-GF-470에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA RODULF-GF-470 12 페이지.
IKEA RODULF-GF-470에 대해서도 마찬가지입니다: 매뉴얼 (25 페이지)

페이지 인쇄

To access full stroke

• Release the down button at the lowest safe point

and then press the down button again for 5

seconds. The desk will move to the mechanical

lowest height to have full stroke access.

Simple memory

To set memory/end positions:

• Move your desk to the level you want to store.

• Press both buttons three times (0.5-1 second

between each press).

• Then press "up" or "down" to set the position

(0.5-1 second).

• Do the same for your second stored setting.

Collision detection

• The system is designed to avoid possible

damages to equipment due to collision.

When desk detects a sudden change in

resistance it will stop the movement and reverse

approximately 50mm. 25mm of travel to activate

in both direction.

Safety regulations

• When the desk is run up/down, keep the

necessary safety distance to avoid being trapped

between the moving desk top and fixed objects in

the surrounding area.

• When the desk is run up/down the user should

keep watch so that nobody is injured or no object

is damaged. The desk top must not bump into

a fixed object in case it overturns. Remove any

office chair before the desk is run up/down, each

time.

• The desk legs must not be altered or

reconstructed in any way. During service and

repair work of the desk, the electrical cable must

always be disconnected from the wall socket.

• Modifications to the legs are absolutely

prohibited.

• The desk must not be used as a hoisting device

for people.

Maintenance and repair instructions

After approximately 1 week of use, check that the

screws are properly tightened.

• If the desk cannot be lowered or raised, check the

connections between the control box and the wall

socket.

• If any part of the electrical system is to be

replaced, the electrical cable must first be

disconnected from the wall socket.

Replace the electrical part and then reconnect the

electrical cable to the wall socket. The desk is now

ready for use.

If the desk still does not work, please contact your

nearest IKEA store or customer service.

Product servicing

Do not attempt to repair this product yourself, as

opening or removing covers may expose you to

dangerous voltages or other risks.

EU Declaration of Conformity

EU Declaration of Conformity is included in the

packaging as a separate document.

Manufacturer: IKEA of Sweden AB

Address: Box 702, SE-343 81 Älmhult, SWEDEN

Telephone no.: +46(0)476-648500

SAVE THESE INSTRUCTIONS