Bristol Clifton 4 사용자 설명서 - 페이지 4

{카테고리_이름} Bristol Clifton 4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristol Clifton 4 16 페이지. Multifuel stoves

UNPACKING & ASSEMBLY OF YOUR STOVE.

WARNING: DUE TO THE WEIGHT OF THE STOVE IT IS RECOMMENDED THAT TWO

PEOPLE ARE REQUIRED TO MOVE & PERFORM THE UNPACKING AND ASSEMBLY

2.1 Remove the outer packaging

Carefully remove the packing straps and lift oﬀ the upper crate. Remove the plastic bag & take

down to the base of the stove. Ensure the plastic bag is disposed of correctly and kept away from

children.

2.2 UNPACKING.

Before assembling, place check contents against the following list and advise your dealer

immediately if any parts are missing

1 x Stove body

1 x Flue Spigot with Fireproof Gasket

1 x Firebox Primary Baﬄe plate A

1 x Firebox Secondary Baﬄe plate B

1 x Flue Blanking Plate

1 x Ash pan & Handle

1 x Grate

1 x Vermiculite brick set

1 x Heat resistant glove

1 x Fixing Kit

2.3 ASSEMBLY.

Open the door and remove ash-pan, ﬂue spigot and ﬁxing kit from inside the

stove.

1. Sit the stove upright and attach the ﬂue spigot for top exit (as pictured),

using the screws supplied. Ensure the ﬁreproof gasket is correctly seated

in the base of the ﬂue adaptor.

2. Install the blanking plate to the alternative ﬂue exit opening. If rear exit

ﬂue conﬁguration is to be used, the blanking plate will be ﬁtted to the top

exit on the stove and the spigot to the rear.

3. Set the ash-pan in position as shown in the picture. An ash-pan

handle is supplied for when the stove is in use.