Jakka ADVANCED J8 매뉴얼

{카테고리_이름} Jakka ADVANCED J8에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jakka ADVANCED J8 5 페이지.

페이지 인쇄

MANUAL for JAKKA ADVANCED CONTROLLER

KEYPAD and PANEL DESCRIPTION

ON/OFF — On/Off Key

MODE — Mode Key

FAN

— Fan Key

▲ ▼ SET

— Increment/Decrement Key

WARNING !!

Parts that need to be considered in the screenshots

are marked with red circle. Please notice the scre-

enshots.

1. ON—OFF OPERATIONS

Use the

key to Opening/Closing operations.

When pressing the key once, the device will switch on

or off.

Off Position

2. OPERATION MODE SETTINGS

While the device is in the On Position, operation mo-

de can be changed with

Note: The active mode icon flashes on the panel.

Ventilation Mode

On Position

key.

Cooling Mode

Cooling

Heating

Auto

Setpoint

Room Tmp

Air Quality

Sup. Air Tmp

Out. Air Tmp

Supply Air Fan Speed

Auto-5-4-3-2-1

3. SETPOINT SETTING

Setpoint Setting

4. MONITORING DIFFERENT TEMPERATURES

The sensor values, which is measured by main control-

ler, are displayed alternately on the panel. In this app-

lication "Room Temperature, Supply Air Temperature,

Outdoor Air Temperature" sensors can be measured

by main controller.

Note 1: If Room Temperature Sensor is not connected to

main controller, Temperature Sensor value of the panel is

measured.

Ventilation

Electrical Heater Stages

Exhaust Air Fan Speed

1-2-3-4-5-Auto

Main Digits

Alarm Notification

Auxiliary Digits

Heating Mode

Use the ▲ and ▼ keys

to adjust the setpoint. If

the keys are pressed one

time, setpoint will be

changed 1 °C. Use the ▲

key to increase the set-

point, use the ▼ key to

decrease the setpoint.

Setting range: 5 °C—30

°C.