IKEA SKYTTA 설치 매뉴얼 - 페이지 14

{카테고리_이름} IKEA SKYTTA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA SKYTTA 16 페이지.
IKEA SKYTTA에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

The doors are too high – reduce door height

In case the SKYTTA doors are too high, you need to cut the

door frame and the door filler panel(s). Please be aware

that this is not possible for glass or mirror door panels.

Check in the planning tool for other panels that cannot

be cut (ie., some textile panels). You can still use panels

that are not suitable for cutting if you combine them with

panels that can be cut (ie., the non-cuttable panels would

need to be placed in the middle of the door frame).

This solution is suitable when the distance between floor and

ceiling is:

150–203.8 cm (59–801/4")

It's possible to cut the door frame and door panels to reduce the

height. This can be done using professional tools, therefore we

recommend that this is done by a professional carpenter. Please

note that this option is not applicable for glass or mirror glass

panels, as the glass is tempered and will shatter into tiny pieces.

Check in the planning tool regarding other panels that cannot be

cut (ie., some textile panels).

150–239 cm (59–941/8")

For this situation, we strongly recommend you use the

services of a professional carpenter with the appropriate

tools. In this illustration, you can see how the system would

look in this situation.

Examples of how to cut door frame and panel

This step should be performed by a professional carpenter with the

appropriate tools.

NOTE! The Assembly Instructions for this step are only available

online.