Gamma Led Vision Starburst Versa 사용자 설명서 - 페이지 3

{카테고리_이름} Gamma Led Vision Starburst Versa에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Led Vision Starburst Versa 18 페이지. 18x30w rgbwa+uv (6in1)

Introduction and Setup

Thank you for choosing our Rayon. For your own safety, please read this manual before installing or

using the device. This manual covers the important information on installation and applications.

Please install and operate the fixture with following instructions. Meanwhile, please keep this manual

for future needs.

In the box you will find:

• Starburst Versa Fixture:

• PowerCon Cable:

• DMX Signal Cable

• Omega Brackets

• Quick Release Pins 2

Optional Accessories

• Base Plate

• Vertical Adapter

•

Mounting and Operation

Use a clamp rated for the full weight of the Starburst Versa to hang the fixture from the

mount(s) on the fixture's yoke.

As an added safety measure be sure to attached at least one properly rated safety cable to the

fixture using on of the safety cable rigging point integrated in the base assembly or on the yoke.

Vertical Installation:

1. Floor Standing: Using the base Plate, align the grooves from the fixture with the grooves

from the base plate. Then slide a pin on each side. Give a quick tug to make sure the pins

locked in properly. Repeat the same steps to mount one Starburst Versa on top of

another Starburst Versa.

2. Vertical Hanging: Using the Vertical Adapter, align its grooves with the grooves of the

Starburst Versa. Then insert a quick release pin on each side and attach a clamp to the

top of the vertical adapter.

Horizontal Installation:

3. Horizontal Floor Installation: Using the Tilt Brackets, align and tilt the fixture to the

position desired and then tighten the knobs on each side. If you're looking to attach 2