Brita Atlantis 사용자 설명서

{카테고리_이름} Brita Atlantis에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brita Atlantis 2 페이지. Pither & dispenser

페이지 인쇄

P I T C H E R & D I S P E N S E R

W a t e r F i l t r a t i o n S y s t e m

User's Guide

www.brita.com

Filter Change Indicator

Changing your filter regularly ensures that you have clear, refreshing,

healthier, great-tasting water. The Electronic Filter Change Indicator and

Calendar Minder

™

make it easy to know when 2 months* have passed. Reset your filter

change indicator each time you replace your filter.

Electronic Filter Change Indicator

(Smart Pitchers Only)

1 Press firmly and hold the start button down for 5 to 10 seconds.

2 As you hold down the button, 4 bars will appear in the display, one after the other.

Do not release the start button until the 4 bars appear and start to flash. If you have difficulty

pressing the start button, a capped ballpoint pen may be used to press the button down.

3 A small flashing dot in the lower right corner of the display shows the indicator is working.

4 Every 2 weeks a bar automatically disappears. When only 1 bar remains, make sure

you have a new filter on hand.

5 After 2 months (when all bars have disappeared), an arrow will flash at the top of the display

reminding you to change your filter. After changing your filter, reset your indicator by following

the steps above.

The filter change indicator contains a non-replaceable sealed battery designed to last 5 years, depending on usage.

After 5 years the pitcher is still functional, but the electronic filter change indicator will eventually stop working.

Calendar Minder

™

(Pitchers with Calendar Minder

Only)

1 Insert a new filter.

2 Set filter indicator to closest date 2 months from now.

3 On the date indicated, remove your filter and repeat steps 1 and 2.

Built-in Calendar Minder

makes it easier to remember

when to change your filter.

Any questions? Visit us at www.brita.com or

You may need to change your filter

*Filter should be replaced after

call 800-24 BRITA (U.S.A.)

more or less often depending on the

40 gallons/151 liters (about

800-387-6940 (CANADA).

amount of water you consume.

2 months for the average family).

Your Brita

System

Thank you for choosing Brita

, the world's #1 brand of household

water filtration.

The Brita

patented and certified water filtration systems turn ordinary water

into healthier, great-tasting drinking water. Just follow the easy instructions in

this booklet to quickly get started using your Brita

To find out more about Brita, visit our website at www.brita.com. While you are

there, sign up to receive special offers and healthy living tips.

Brita

System Components

LID

FILTER

RESERVOIR

PITCHER OR

DISPENSER

To register your system and to find more information on our other products,

visit us at: www.brita.com

19315000.014

Remember...

Change your filter about every 2 months for healthier, great-tasting water!*

c The Brita

Pitcher Filter is not intended to purify water. Do not use with water that is

microbiologically unsafe or of unknown quality without adequate disinfection before

or after the system. Individuals requiring water of special microbiological purity

should follow the advice of their doctor or local health officials regarding the use and

consumption of their tap water and Brita

water.

c We recommend that you store your Brita

system in the refrigerator to get cold, great-

tasting water. If you would like to keep your Brita

system outside of the refrigerator,

we recommend that you keep it in a cool area that is not in direct sunlight and replace

any filtered water that has been left sitting for several days or more. This will help make

sure you get refreshing, great-tasting Brita

water.

c It is important that the bottom of the filter be in contact with the filtered water to

prevent the filter from drying out. If the filter dries out, resoak for 15 minutes.

Brita

Water Filtration Pitchers/Dispensers

Classic – Model # OB01/OB03

Slim – Model # OB11/OB03

UltraMax – Model # OB24/OB03

Space Saver – Model # OB21/OB03

Deluxe – Model # OB26/OB03

Riviera – Model # OB35/OB03

Atlantis – Model # OB32/OB03

Aqualux – Model # OB37/OB03

Grand – Model # OB36/OB03

Chrome – Model # OB39/OB03

Systems tested and certified by the WQA

against NSF/ANSI Standards 42 and 53 for

the reduction of the claims specified on the

Performance Data Sheet.

™

You'll be pleased to know that we offer a

Brita LP

30-day unconditional money-back guarantee!

1221 Broadway

Thank you again for your trust in Brita.

Oakland, CA 94612

Still have questions? Or to locate retailers:

Brita Canada Corporation

Visit www.brita.com or call U.S.A. 1-800-24-BRITA,

150 Biscayne Crescent

CANADA 1-800-387-6940.

Brampton (Ontario) L6W 4V3

Getting Started

Wash your hands with soap and water; then remove filter from filter bag.

NOTE: It is normal for a new filter to be wet when first opened. Filters are washed

during manufacturing to prevent them from drying out.

pitcher/dispenser system.

Soak filter upright in cold water for 15 minutes.

Hand-wash pitcher/dispenser, lid and reservoir with a mild

detergent. Do not use abrasive cleaners. Rinse well.

Brita

TIP: Hand-wash pitcher/dispenser, lid and reservoir

periodically. Do not wash in dishwasher. For best results cleaning

chrome pitcher lids, wipe with a soft sponge soaked in a solution

of one teaspoon of vinegar in a cup of water.

Rinse filter under cold, running tap water for a few seconds.

Insert filter into reservoir by lining up groove in filter with notch

in reservoir. Press firmly to ensure a tight seal. Fill the reservoir

with cold tap water.* Discard your first two pitchers of filtered

water (or first dispenser), or use this water for plants. It is normal

for carbon dust to appear in your first fillings.

For healthier, great-tasting water, replace your filter after 40 gallons/151 liters

(about 2 months for the average family).

*Hot water should not be used with the Brita

Pitcher Filter (Max. 85°F/29°C – Min. 32°F/0°C).

PERFORMANCE DATA SHEET

IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.

It is recommended that, before purchasing a water treatment unit, you have your water supply tested to determine your actual water

treatment needs.

REDUCTION

Influent Challenge

SUBSTANCE

Filter Effluent

Concentration

Actual

NSF Target

Average Maximum Average Minimum

NSF/ANSI Standard 53 – Health Effects

Copper

3.0 ppm

3.0±0.3 ppm

0.12 ppm 0.30 ppm

Copper

3.2 ppm

3.0±0.3 ppm

0.62 ppm 0.83 ppm

Mercury

6.0 ppb

6±0.6 ppb

0.2 ppb

Mercury

5.9 ppb

6±0.6 ppb

0.2 ppb

0.6 ppb

Cadmium

30 ppb

30±3 ppb

1.3 ppb

2.0 ppb

Cadmium

30 ppb

30±3 ppb

2.0 ppb

4.8 ppb

NSF/ANSI Standard 42 – Aesthetic Effects

Chlorine

2.0 ppm

2±0.2 ppm

0.07 ppm 0.12 ppm

Zinc

10 ppm

10±1 ppm

3.4 ppm

4.4 ppm

These systems have been tested according to NSF/ANSI 42 and 53 for reduction of the substances listed. The concentration of each of the indicated

substances in water entering the systems was reduced to a concentration less than or equal to the permissible limit for water leaving the systems,

as specified in NSF/ANSI 42 and 53.

* The U.S. EPA Levels are Maximum Contaminant Levels (MCLs) and are the same as the NSF Maximum Permissible Product Water Concentrations

listed in NSF/ANSI Standards 42 and 53 unless noted otherwise.

U.S. EPA Action Level

Pacifica – Model # OB41/OB03

Health Canada Maximum Acceptable Concentration (MAC).

Vintage – Model # OB43/OB03

Health Canada Aesthetic Objective (AO).

Bella – Model # OB44/OB03

Please refer elsewhere in this User's Guide for the proper conditioning and use and care requirements. Maintenance according to the manufacturer's

instructions is essential for proper filter performance. Replace the Brita

For maximum efficiency, process no more than 2 gallons/7.5 liters daily. Replacement filters (model OB03) generally cost $8.00 or less.

Testing was performed under standard laboratory conditions. The contaminants or other substances removed or reduced by this water treatment device

are not necessarily in all users' water. Filter performance may vary based on local water conditions.

The Brita

Pitcher Filter is not intended to purify water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate

disinfection before or after the system. Individuals requiring water of special microbiological purity should follow the advice of their doctor or local health

officials regarding the use and consumption of their tap water and Brita water.

Hot water should not be used with the Brita

Pitcher Filter (Max. 85°F/29°C – Min. 32°F/0°C).

* Filter should be replaced

after 40 gallons/151 liters

(about 2 months for the

average family).

The Brita

For best results when filling pitcher/dispenser reservoir, pour tap

water on the side of the reservoir rather than directly on top of

the filter. Allow water to filter completely before pouring or refilling reservoir.

The Brita

• Advanced Filtration

15min

with Activated Carbon

and Ion Exchange Resin

• Reduces Contaminants:

Copper

Mercury

Cadmium

• Reduces Chlorine

(Taste and Odor)

For maximum efficiency, filter no

more than 2 gallons (7.5 liters) daily.

The contaminants or other substances removed or reduced

by this water treatment device may not be in all users' water.

TESTING PARAMETERS

U.S. EPA Level*/

NSF Maximum

Health

Percent Reduction

Permissible

Canada

Alkalinity

Temp.

Product Water

Guideline

(ppm CaCO

)

(°C)

Concentration

96%

90%

1.3 ppm

≤1.0 ppm

6.7

80%

74%

1.3 ppm

≤1.0 ppm

120

8.7

96%

89%

2 ppb

1 ppb

6.6

95%

93%

2 ppb

1 ppb

110

8.5

95%

93%

5 ppb

6.5

93%

84%

5 ppb

130

8.6

96%

94%

N. A./50%

N. A.

7.4

66%

56%

N. A./5 ppm

≤5.0 ppm

7.4

NSF/ANSI Standard 42 reduction requirement.

N.A. = Not applicable.

Pitcher Filter every 40 gallons/151 liters (about 2 months for the average family).

Filter

Filtration System

Meijer.com