Major Manufacturing ADAMS RITE 4501 Series 사용 설명서 - 페이지 6

{카테고리_이름} Major Manufacturing ADAMS RITE 4501 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major Manufacturing ADAMS RITE 4501 Series 10 페이지. Lip strike template

페이지 인쇄

Pencil lines showing the center line of the

jamb and the height of the latch when locked

have been established. Use the alignment

marks on the template to align with the pencil

lines on the jamb. Use the two lines on the

top of the template. DO NOT USE THE TWO

CENTER LINES. We will route the strike

opening with our HIT-40AR4 template. Attach

to jamb with the supplied tek point screws

and an electric drill. NOTE: It is a good idea

that your drill is equipped with a clutch

feature, this will prevent snapping the screw

off in the jamb.

Make sure the template is square to the jamb

prior to running the second screw in.

Template mounted and ready to go. We

recommend the area to be routed be

lubricated with a cutting lube. We use a

product called Tapmatic Edge Cream made

by the LPS Company. You can find this

product at industrial hardware stores or

machine shop supplies. This is also a handy

product to use for other drilling or tapping

chores.

Page 6