DECK DOLLY JD 1023E 조립 지침 매뉴얼 - 페이지 6

{카테고리_이름} DECK DOLLY JD 1023E에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DECK DOLLY JD 1023E 8 페이지. 2020 and newer with 54d (pictured) or 60d deck

9) Install the brackets as shown below. Depending on how your deck is set up, you may

have to install the brackets on the inside or outside of the uprights. Leave these bolts

loose at this time.

Assembly Instructions:

Starting from the bottom hole of the 5, place a 5/16 x1 ¼ bolt in bottom

bracket hole, see pics above.

II.

Place a 5/16 x 1 ½ bolt through spacer and safety latch into top bracket

hole.

III.

Insure that the latch is properly orientated as shown above.

The Dolly should look as shown below at this point. Using the quick pins, attach

the upper brackets in the top set of holes as shown below temporarily.