DECK DOLLY JD 2720 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} DECK DOLLY JD 2720에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DECK DOLLY JD 2720 7 페이지.

Preassemble the bottom cross support tube and brackets as shown with ¼ "x 2 ¼"

bolts while leaving the nuts loose.

3) Preassemble the Upper Deck Support as shown below with 4 1/2" nuts.

4) Preassemble the Base Plates and Tires as shown below. The regular nut should be on

the inside and the serrated nut should be to the outside of the base plate. Take care

to tighten the bolt and nuts to allow the tire to spin freely but not be loose on the

bolt. Use 2 ½" x 3 ¼" bolts with hex nut between tire and bracket and flange nut on

outside of plate.