DECK DOLLY JD 7 Series 조립 지침 매뉴얼 - 페이지 4
{카테고리_이름} DECK DOLLY JD 7 Series에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DECK DOLLY JD 7 Series 8 페이지. With 7 iron deck and others
페이지 인쇄3) Preassemble the bottom cross support tube and brackets as shown with ¼ "x 2 ¼"
bolts while leaving the nuts loose.
4) Preassemble the Upper Deck Support as shown below with 4 - 1/2" nuts.
5) Preassemble the Base Plates and Tires as shown below. The serrated nuts should be
on the inside and the nylon lock nuts should be to the outside of the base plate. Take
care to tighten the bolt and nuts to allow the tire to spin freely but not be loose on
the bolt. Use 2 ½" x 6 ¼" threaded rod for axle bolts.
4