Deck Superstore Rough-Sawn Pergola System 설치 매뉴얼 - 페이지 5

{카테고리_이름} Deck Superstore Rough-Sawn Pergola System에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Deck Superstore Rough-Sawn Pergola System 12 페이지.

Outer Beam

Outer Beams extend one foot past the Inner Beams on each side and feature decorative cuts

to match the Rafter Tails. Attach the Outer Beam to the Inner Beam with one 5" screw at every

Rafter location. Offset from the center of your markings so the 10' screw will not hit it.

5" Construction Screw

x1 per Rafter location

Inner Beam

Outer Beam

Rafter Tail

*An alternative method for joining the Inner and Outer Beams so that

the Rafters and Rafter tails are flush to each other across the top

(see page 8) is to layout the Rafters and Rafter Tails upside-down on

a flat surface. Then, place the Outer Beams upside-down into the

grooves created by the rafter tails, then attach the Inner and Outer

Rafter

Beams together at each rafter location with 5"screws, before

installing this beam assembly on the posts.