DECKED DS1 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} DECKED DS1에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DECKED DS1 13 페이지. For ford super duty 6'9” bed length 1999-2016
DECKED DS1에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (13 페이지)

페이지 인쇄
DECKED DS1 설치 지침 매뉴얼
INSTALL: DRAWER HANDLES
• One drawer handle assembly needs to be installed.
• Save yourself the headache, watch this short installation video: DECKED.com/videohandle.
• From the underside of drawer, place the springs into the cavities on either side of the handle slots,
red spring=right spring; BAG HANDLE.
• Install a clevis pin through each outside drawer hole and through spring; BAG HANDLE.
• With DECKED logo facing outward, insert the handle ends behind the spring arms. Rotate the arms of the handle toward
the clevis pins, pulling the spring arm downward. When the handle hole is lined up with the clevis pin, push the pin
through the handle hole and through the inside drawer hole. Repeat on the other side of the handle.
• Install a hair pin through the clevis pin; BAG HANDLE.
WRONG:
SPRING ARM IS HERE
(NOT FULLY HORIZONTAL)
WRONG:
SPRING ARM OUT
OF HANDLE NOTCH
Page 10 | v.4 | DS1
NOTE: Each spring arm should point inward, not outward.
TOP VIEW
CORRECT:
SPRING ARM IS HERE
(FULLY HORIZONTAL)
CORRECT:
SPRING ARM FITS
IN HANDLE NOTCH
HANDLE OVERVIEW
SPRING ARMS
POINT INWARD
HELPFUL TIP: MAKE SURE SPRINGS HAVE
THE LONG ARM HORIZONTAL AND SHORT LEG
VERTICAL BEFORE INSERTING HANDLE
SPRING
NOTCHES
DECKED. COM | #DECKEDUSA | @DECKEDUSA