aguri VISION DX10 사용자 설명서 - 페이지 16
{카테고리_이름} aguri VISION DX10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. aguri VISION DX10 20 페이지.
페이지 인쇄Capture mode (Single shot and Timer)
Use this setting to choose between taking single shots and using the timer to take single shots.
To change the setting, enter the menu and use the up and down buttons to highlight 'Capture mode'. Select it by
pressing the Video/Playback/OK button and use the up or down button to make your selection. Press the
Video/Playback/OK button to save your selection and return to the menu.
To exit the menu and return to the standby screen, press the Menu/Return button.
Resolution
Use this setting to change the resolution.
Enter the menu and use the up and down buttons to highlight 'Resolution'. Select it by pressing the Video/Playback/OK
button and use the up or down button to choose between 12M4000*3000, 10M3648*2736, 8M3264*2448,
5M2592*1944, 3M2048*1536, 2MHD1920*1080, 1.3M1280*960 or VGA640*480. Press the Video/Playback/OK
button to save your selection and return to the menu.
To exit the menu and return to the standby screen, press the Menu/Return button.
Sequence (multiple frame capture)
Use this setting to capture multiple still frames instead of one still picture.
Enter the menu and use the up and down buttons to highlight 'Sequence'. Select it by pressing the Video/Playback/OK
button and use the up or down button to choose Off or On. Press the Video/Playback/OK button to save your selection
and return to the menu.
To exit the menu and return to the standby screen, press the Menu/Return button.
Quality
Use this setting to select the quality of the picture you would like to capture.
Enter the menu and use the up and down buttons to highlight 'Quality'. Select it by pressing the Video/Playback/OK
button and use the up or down button to choose between Fine, Normal and Economy. Press the Video/Playback/OK
button to save your selection and return to the menu.
To exit the menu and return to the standby screen, press the Menu/Return button.
16.