Major tech MT 770 사용 설명서 - 페이지 10

{카테고리_이름} Major tech MT 770에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT 770 16 페이지. Clamp meter
Major tech MT 770에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

4. Operation

NOTICES: Read and understand all warning and precaution statements

listed in the safety section of this operation manual prior to using this

meter. Set the function select switch to the OFF position when the meter is

not in use.

4.1. AC Current Measurements

WARNING: Ensure that the test leads are disconnected from the meter

before making current clamp measurements.

1. Set the Function switch to the 1000A AC, 600A AC range.

2. If the range to be measured is not known, select the higher range first

then move to the lower range if necessary.

3. Press the trigger to open jaw. Fully enclose one conductor to be

measured.

4. The clamp meter LCD will display the reading.

INCORRECT

CORRECT