Major tech MT155 사용 설명서 - 페이지 6

{카테고리_이름} Major tech MT155에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT155 8 페이지. Coating thickness meter

Calibration and Measurement

The gauge can calibrate Zero-point of Fe or Non-Fe, or DELETE wrong

calibrated zero-point of Fe or Non-Fe. It is recommended that the zero-point

be calibrated before use.

Zero-point Calibration of Fe or Non-Fe

•

Press and hold the ZERO button to Zero-point the calibration of the Fe or

Non-Fe measuring mode

•

In the Fe mode, Zero-point calibration of Fe.

•

In the Non-Fe mode, Zero-point calibration of Non-Fe (Less than

50UM(µm) is effective).

Delete Fe or Non-Fe Zero-point

1. Press the SELECT button to enter the MENU

2. Press the UP/DOWN button to SELECT CALIBRATION

3. Press the SELECT button to ENTER CALIBRATION

4. Press the UP/DOWN button to delete the ZERO-POINT of Fe or Non-Fe

5. Press the SELECT button for OK

6. Press the BACK button to RETURN

Delete Functions

In MENU system, you can find following function

•

Delete current data: in measurement interface, you can delete the last

data entry by pressing the BACK button.

•

Delete all data: Enter menu-view; you can delete all current data and

statistics

•

Delete Group data: Enter menu-view-group data; you can delete this

group data by pressing the SELECT button

Trouble Shooting

The following list of error messages explains how to identify and eliminate

faults.

Err1 Fe probe fault

Err2 Non-Fe probe fault

Err3 Both probes.

Err4 Fe probe fault

Err5 Non-Fe probe fault