Major tech MT26 사용 설명서 - 페이지 12

{카테고리_이름} Major tech MT26에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT26 20 페이지. 600v ac/dc bluetooth multimeter

4.2. AC CURRENT MEASUREMENTS

WARNINGS: Observe all safety precautions when working on live

circuits. Do not measure current on circuits that exceed 600V.

Measurements in the 10A range should be limited to 30 seconds

maximum every 15 minutes.

1. Set the rotary function switch to the 10A

position.

2. lnsert the black test lead into the COM

input jack and the red test lead into the

10A input jack.

3. Remove power from the circuit under

test, then open up the circuit at the

point where you wish to measure

current.

4. Touch the test lead probes in series with

the circuit being measured.

5. Apply power to the circuit.

6. Read the current on the LCD display.

WARNINGS: Observe all safety precautions when working on live

circuits. Do not measure current on circuits that exceed 600V.

Measurements in the 10A range should be limited to 30 seconds

maximum every 15 minutes.

1. Set the rotary function switch to the 10A

position.

2. lnsert the black test lead into the COM input jack

and the red test lead into the 10A input jack.

3. Remove power from the circuit under test, then

open up the circuit at the point where you wish

to measure current.

4. Touch the test lead probes in series with the

circuit being measured. Touch the red probe to

the positive side of the circuit and touch the

black probe to the negative side of the circuit.

5. Apply power to the circuit.

6. Read the current on the LCD display.

10 12