IKEA BEJUBLAD 매뉴얼 - 페이지 12

{카테고리_이름} IKEA BEJUBLAD에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA BEJUBLAD 48 페이지. Ikea oven
IKEA BEJUBLAD에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지), 매뉴얼 (24 페이지), 매뉴얼 (16 페이지), 사용 설명서 (36 페이지), 매뉴얼 (8 페이지), 매뉴얼 (41 페이지), 매뉴얼 (20 페이지), 매뉴얼 (32 페이지), 사용 설명서 (24 페이지)

페이지 인쇄

ENGLISH

5. Press

to confirm.

6. When the set time ends, the symbol

and the set time flash. The acous-

tic signal sounds for two minutes. The

appliance deactivates. Press a button

or open the appliance door to stop the

signal.

If you press

for Duration

switches to setting the End

Setting the Minute Minder

Used to set a countdown time. The maxi-

mum time you can set is 23 hours 59 mi-

nutes. This function has no effect on the op-

eration of the oven. You can set the Minute

Minder at any time, also if the appliance is

off.

1. Press

again and again until

00 flash in the display.

2. Press + or - to set the Minute Minder. At

first the time is calculated in minutes

and seconds. When the time you set is

longer than 60 minutes, the symbol

comes on in the display. The appliance

then calculates the time in hours and

minutes.

Using the accessories

Warning! Refer to the Safety chapters.

Core temperature sensor

The core temperature sensor measures the

core temperature of the meat. When the

meat is at the set temperature, the appli-

ance deactivates.

There are two temperatures to be set:

• The oven temperature.

• The core temperature. Refer to the values

in the table.

Recommended core temperatures

50 °C

60 °C

70 °C

while setting the time

, the appliance

function.

and

Rare

Medium

Well done

3. The Minute Minder starts automatically

after five seconds.

4. When the set time ends, the acoustic

signal sounds for two minutes. 00:00

and

flash in the display. Press a but-

ton to stop the signal.

If you set the Minute Minder when the

Duration

or End

ates, the symbol

Count Up Timer

Use the Count Up Timer to monitor how

long the oven operates.

Press

again and again until the display

shows time without clock symbols.

You cannot use the Count Up Timer

when the Duration

tion operates.

Important! Only use the core temperature

sensor supplied with the appliance, or

genuine replacement parts.

1. Set the oven function and the oven tem-

perature.

2. Put the tip of the core temperature sen-

sor into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket on the side wall

of the oven.

The display shows the symbol of the

core temperature sensor

default core temperature. When you

use the core temperature sensor for the

first time, the default core temperature

is 60 °C.

function oper-

comes on in the display.

or End

func-

and the